Datasheet4U Logo Datasheet4U.com

S-13R1 - REVERSE CURRENT PROTECTION CMOS VOLTAGE REGULATOR

Key Features

  • br>.
  • Output voltage: 1.2 V to 4.0 V, selectable in 0.05 V step.
  • Input voltage: 2.0 V to 5.5 V.
  • Output voltage accuracy: ±1.0% (1.2 V to 1.45 V output product: ±15 mV).
  • Dropout voltage: 150 mV typ. (3.0 V output product, IOUT = 100 mA).
  • Current consumption: During operation: 5 μA typ. , 9 μA max.
  • Output current: During power-off: 0.1 μA typ. , 1.0 μA max. Possible to output 150 mA (VIN ≥ VOUT(S) + 1.0 V).
  • 1.
  • Input and output.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S-13R1 CMOS VOLTAGE REGULATOR ABLIC

Other Datasheets by Seiko Instruments

Part Number Description
S-1312 LOW CURRENT CONSUMPTION HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1312xxxH HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1315 LOW CURRENT CONSUMPTION OUTPUT CAPACITOR-LESS CMOS VOLTAGE REGULATOR
S-1317 100mA CMOS VOLTAGE REGULATOR
S-1335 HIGH RIPPLE-REJECTION SOFT-START FUNCTION CMOS VOLTAGE REGULATOR
S-13D1 HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1135 High Ripple Rejection Low Dropout Middle Output Current CMOS Voltage Regulator
S-11L10 SUPER-LOW OUTPUT LOW DROPOUT CMOS VOLTAGE REGULATOR
S-19104 OPERATION BUILT-IN DELAY CIRCUIT VOLTAGE DETECTOR
S-19106 OPERATION BUILT-IN DELAY CIRCUIT VOLTAGE DETECTOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S-13R1 Series www.sii-ic.com © Seiko Instruments Inc., 2012-2014 REVERSE CURRENT PROTECTION CMOS VOLTAGE REGULATOR Rev.1.2_00 The S-13R1 Series, developed by using the CMOS technology, is a positive voltage regulator IC of 150 mA output current, which has low dropout voltage, high-accuracy output voltage and low current consumption. Even with low current consumption of 5 μA typ., it has high ripple-rejection of 70 dB typ., and a ceramic capacitor of 1.0 μF or more can be used as the input and output capacitors. The S-13R1 Series includes an overcurrent protection circuit that prevents the load current from exceeding the current capacity of the output transistor and a thermal shutdown circuit that prevents damage because of overheating.