S-75LU04ANC Datasheet PDF - Seiko Single INVERTER without Buffer Specs

S-75LU04ANC - Single INVERTER without Buffer

Datasheet Summary

Description

The S-75LU04ANC is a single packaged inverter without buffer fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V).

Features

Ÿ Wide power supply range: 1 V to 3.6 V Ÿ Low current consumption: 1.0 µA max. (at 3.6 V, 25°C) Ÿ Typical propagation delay: tpd = 6 ns (at 3 V) Ÿ High noise immunity: Ÿ Power down protection: VNIH=VNIL=28% VCC minimum All pins Ÿ Very small plastic package: SC-88A n.

Datasheet Details

Part number	S-75LU04ANC
Manufacturer	Seiko
File Size	54.75 KB
Description	Single INVERTER without Buffer
Datasheet	S-75LU04ANC Datasheet
Additional preview pages of the S-75LU04ANC datasheet.

📁 Similar Datasheet

S-75V00ANC - MINI LOGIC SERIES 2 INPUT NAND GATE (ABLIC)

S-7038AF - PAGING DECODER IC (POCSAG) (Seiko Instruments Inc)

S-7040D - PAGING DECODER IC (POCSAG) (Seiko Instruments Inc)

S-7041B - PAGING DECODER (Seiko Instruments Inc)

S-70L41B - PAGING DECODER (Seiko Instruments Inc)

S-7235 - Pulse / DTMF Switchable Dialer (Seiko Instruments)

S-7292AF - 1-chip MICROCOMPUTER FOR TELEPHONE SET (Seiko Instruments Inc)

S-7600 - TCP/IP Network Protocol LSI (ETC)

S-7600A - TCP/IP Network Protocol LSI (ETC)

S-7600A - Hardware Specification (TCP/IP Network Stack LSI) (Seiko Instruments Inc)

Full PDF Text Transcription

Click to expand full text

Single INVERTER without Buffer S-75LU04ANC n General Description The S-75LU04ANC is a single packaged inverter without buffer fabricated by utilizing advanced silicon-gate CMOS technology which provides the inherent benefit of CMOS low power consumption to achieve operation by only a couple of batteries (1 to 3 V). The S-75LU04ANC is suitable for a wide variety of linear circuits. Input voltage is allowed to be applied even if power voltage is not supplied because no diode is inserted between an input pin and VCC. This allows for interfaces between power supplies of different voltage, output level conversion from 3 V to 1 V and battery backup applications. n Features Ÿ Wide power supply range: 1 V to 3.6 V Ÿ Low current consumption: 1.0 µA max. (at 3.

Published: Feb 28, 2015 |