IP3M12 Datasheet | Seme LAB

FEATURES - 200m A Continuous output current per bridge (100m A for IP1Mxx, IP2Mxx) - Internal output clamp diodes - Hysteretic logic inputs for noise immunity - Thermal shutdown protection - Peak current limit protection - Crossover current blanking - Separate +5V logic supply for minimum power dissipation (1M10 series only) - Separate +7V to +36V logic supply (1M12 series only) P WM B 4 DIR B 5 VC B 6 +V O B 7 J Package - 14 Pin Ceramic DIP N Package - 14 Pin Plastic DIP D Package - 14 Pin Plastic (150) SOIC Order Information Part Number IP1M10 IP2M10 IP3M10 IP1M12 IP2M12 IP3M12 J- Pack 14 Pin N- Pack 14 Pin D- 14 14 Pin Temp. Range -55 to +125°C -40 to +85°C 0 to +70°C -55 to +125°C -40 to +85°C 0 to +70°C Note: To order, add the package identifier to the part number. eg. IP1M10J IP2M10D- 14 IP3M12N ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VSS VC Logic Supply Voltage Driver Supply Voltage Logic Inputs Output Current Peak Output Current PD PD TJ TSTG Power Dissipation Derate above 50°C Power Dissipation Derate above 25°C Operating Junction Temperature Storage Temperature Range Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. 1M10 Series 1M12 Series +7V +40V +40V -0.3 to +40V ±250m A Internally Limited TA = 25°C TC = 25°C 1W 10m W/°C 2W 16m W/°C See Ordering Information - 65 to +150°C Prelim. 7/95 Semelab plc. DESCRIPTION SEME IP1M10 SERIES IP1M12 SERIES The IP1M10 and IP1M12 series each contain two full H-bridge power drivers capable of delivering 200 m A continuous output current per channel (100m A for 1Mxx / 2Mxx). Each bridge may be run from its own supply voltage of up to 36V and is controlled by 2 high voltage protected logic level inputs with internal hysteresis for noise immunity. Protection features include thermal shutdown, peak current limiting, crossover current blanking, and internal output clamp diodes. Logic supply current is provided by a separate pin so that standby power dissipation may be minimised. The...