SMP600G-FL Datasheet | Seme LAB

FEATURES - HIGH SENSITIVITY - EYE RESPONSE DETECTION - PHOTODIODE ISOLATED FROM PACKAGE - EXCELLENT LINEARITY - LOW NOISE - WIDE SPECTRAL RESPONSE - BG18 INTEGRAL OPTICAL FILTER - TO39 HERMETIC METAL CAN PACKAGE - EMI SCREENING MESH AVAILABLE DESCRIPTION The SMP600G-FL is a Silicon P.I.N. photodiode incorporated in a hermetic metal can package. The electrical terminations are via two leads of diameter 0.018" on a pitch centre diameter of 0.2". The can structure incorporates an photoptic response optical filter with peak transmission at 510nm. The photodiode is electrically isolated from the package, which has a separate earth lead. The larger photodiode active area provides greater sensitivity than the SMP550 range of devices, with a slight reduction in speed. Inherent in the device geometry is a reduction in the receiving angle. The photodiode structure has been optimised for high sensitivity, asymmetric light measurement applications. The metal can, isolated photodiode and optional screening mesh ensure a rugged device with a high degree of immunity to conducted and radiated electrical interference. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) Operating temperature range Storage temperature range Temperature coefficient of responsively Temperature coefficient of dark current Reverse breakdown voltage -40°C to +70°C -45°C to +80°C 0.35% per °C x2 per 8°C rise 60V Semelab plc. Telephone (01455) 556565. Telex: 341927. Fax (01455) 552612. Prelim. 1/98 CHARACTERISTICS (Tamb=25°C unless otherwise stated) Characteristic Test Conditions. Responsively λ at 900nm Active Area Dark Current E = 0 Dark E = 0 Dark 1V Reverse 10V Reverse Breakdown Voltage E = 0 Dark 10µA Reverse Capacitance E = 0 Dark E = 0 Dark 0V Reverse 20V Reverse Rise Time 30V Reverse 50Ω 900nm Min. 0.45 Typ. 0.55...