SKYPER32PRO Datasheet | Semikron Danfoss

Features - - Two output channels - Integrated potential free power supply - Under voltage protection prim/sec - Driver interlock top / bottom - Dynamic short circuit protection - Halt status with failure management - External failure input (sec.) - Soft turn-off - IEC 60068-1 (climate) 40/085/56, no condensation and no dripping water permitted, non-corrosive, climate class 3K3 acc. EN60721 - Coated with varnish Typical Applications - Driver for IGBT modules in bridge circuits in industrial application - DC bus voltage up to 1200V Footnotes The insulation test is not performed as a series test at SEMIKRON and must be performed by the user Isolation coordination in pliance with EN 61800-5-1 PDII, OVC III Operating temperature is real ambient temperature around the driver core Environmental conditions and detailed technical information are described in the Technical Explanation Absolute Maximum Ratings Symbol Conditions VS Vi H Vi L Iout(peak) Iout(avg) fmax VCE dv/dt Visol IO Vimp Visol PD Qout/pulse Top Tstg Supply voltage primary Input signal voltage (HIGH) Input signal voltage (LOW) Output peak current Output average current Max. switching frequency Collector emitter voltage sense across the IGBT Rate of rise and fall of voltage secondary to primary side Insulation test voltage input - output (AC, rms, 2s) Impulse withstand voltage Partial discharge extinction voltage, rms, QPD ≤ 10p C Max. rating for output charge per pulse Operating temperature Storage temperature Characteristics Symbol Conditions min. Values 16 Vs + 0.3 GND - 0.3 20 90 50...