SKYPER32R Datasheet | Semikron Danfoss

Features - Two output channels - Integrated potential free power supply - Under voltage protection - Driver interlock top / bottom - Dynamic short circuit protection - Shut down input - Failure management - UL recognized, ROHS - IEC 60068-1 (climate) 40/085/56, no condensation and no dripping water permitted, non-corrosive, climate class 3K3 acc. EN60721 Typical Applications- - Driver for IGBT modules in bridge circuits in industrial application - DC bus voltage up to 1200V Footnotes with external high voltage diode Please Note: the insulation test is not performed as a series test at SEMIKRON and must be performed by the user according to VDE 0110-20 can be expanded to 6,3µQ with boost capacitors Isolation coordination in pliance with EN50178 PD2 Operating temperature is real ambient temperature around the driver core Degree of protection: IP00 Absolute Maximum Ratings Symbol Conditions Values Unit Vs Vi H Vi L Iout PEAK Iout AVmax fmax VCE dv/dt Visol IO Visol PD Visol12 RGon min RGoff min Qout/pulse Top Tstg Supply voltage primary Input signal voltage (HIGH) Input signal voltage (LOW) Output peak current Output average current Max. switching frequency Collector emitter voltage sense across the IGBT Rate of rise and fall of voltage secondary to primary side Insulation test voltage input - output (AC, rms, 2s) Partial discharge extinction voltage, rms, QPD ≤ 10p C Insulation test voltage output 1 - output 2 (AC, rms, 2s) Minimum rating for external RGon Minimum rating for external RGoff Max. rating for output charge per pulse Operating temperature Storage temperature 16 Vs + 0.3 GND - 0.3 15 50 50 1.5 1.5 2.5 -40 ... 85 -40 ... 85 V V V A m A k Hz V k...