Datasheet4U Logo Datasheet4U.com

ACS411CS - Acapella Optical Modem

General Description

The ACS411CS is a complete controller, driver and receiver chipset supporting full-duplex synchronous transmission up to 51.840Mbps over single/twin optical fiber.

The designer can share the available bandwidth over 1 to 16 main channels.

Key Features

  • Three chip set supporting full duplex serial transmission over twin optical fiber, one fiber with WDM.
  • Incorporates 2 x 256kbps maintenance channels with optionof multi channel operation with a framing signal.
  • AC µ Processor Link budgets of 27dB with Laser + PIN on single mode fiber. Conforms to all jitter attenuation, jitter transfer and input jitter tolerance specification defined by AT&T, ITU-T and Bellcore recommendations. Bit Error.

📥 Download Datasheet

Datasheet Details

Part number ACS411CS
Manufacturer SEMTECH
File Size 259.10 KB
Description Acapella Optical Modem
Datasheet download datasheet ACS411CS Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACS402-5SB4 QUAD AC LINE SWITCH ARRAY STMicroelectronics
ACS422A67 CODEC TSI
ACS422D67 CODEC TSI
ACS00MS Radiation Hardened Quad 2-Input NAND Gate Intersil Corporation
ACS02MS Radiation Hardened Quad 2-Input NOR Gate Intersil Corporation

Other Datasheets by SEMTECH

Part Number Description
ACS401 Acapella Optical Modem
ACS406CS Acapella Optical Modem
ACS101A Acapella Optical Modem
ACS102A ACS102A Fiber Modem
ACS103 Acapella Optical Modem

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
4000 SERIES Acapella Optical Modem IC ACS411CS Main Features * * * Three chip set supporting full duplex serial transmission over twin optical fiber, one fiber with WDM. * * * * Incorporates 2 x 256kbps maintenance channels with optionof multi channel operation with a framing signal. * * AC µ Processor Link budgets of 27dB with Laser + PIN on single mode fiber. Conforms to all jitter attenuation, jitter transfer and input jitter tolerance specification defined by AT&T, ITU-T and Bellcore recommendations. Bit Error Rate (BER) of < 10-10 ACS9020 available in 64 pin TQFP and ACS4110 available in 176 pin TQFP package.