Datasheet4U Logo Datasheet4U.com

EDGE4717D - Per Pin Precision Measurement

General Description

The Edge4717D is a precision measurement unit designed for automated test equipment and instrumentation.

Manufactured in a wide voltage CMOS process, it is a monolithic solution for a quad channel per pin PMU.

Key Features

  • a PMU that can force or measure voltage over a typical 15V I/O range, and supports 4 current ranges: ± 3.2 µA, ± 80 µA, ± 2 mA, ± 30 mA. The Edge4717D has an on-board window comparator per channel that provides two bits of information.
  • DUT too high and DUT too low. There is also a monitor pin which provides a real time analog signal proportional to either the voltage or current measured at the DUT. The Edge4717D is designed to be a low power, low cost, small footprint solution to allow.

📥 Download Datasheet

Datasheet Details

Part number EDGE4717D
Manufacturer SEMTECH
File Size 241.73 KB
Description Per Pin Precision Measurement
Datasheet download datasheet EDGE4717D Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
Edge118 Low Skew Clock Spreader Semtech
Edge142 Per Pin timing Deskew w 4x2 Cross Point Switch Semtech
Edge646 Pin Electronics Driver/ Window Comparator/ and Switch Matrix Semtech
Edge647 Pin Electronics Driver/ Window Comparator/ and Switch Matrix Semtech
Edge649 Octal Pin Electronics Driver/Receiver Semtech

Other Datasheets by SEMTECH

Part Number Description
EDGE4707B Quad Channel Per-Pin Precision Measurement
EDGE211 Dual Pin Electronics Driver
EDGE629 1 GHz Timing Deskew and Quad Fanout Element
EDGE6420 Per-Pin Electronics Companion DAC
EDGE6435 (EDGE6435 / EDGE6436) Per-Pin Electronics Companion DAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Edge4717D Quad Channel, Per Pin Precision Measurement Unit TEST AND MEASUREMENT PRODUCTS Description The Edge4717D is a precision measurement unit designed for automated test equipment and instrumentation. Manufactured in a wide voltage CMOS process, it is a monolithic solution for a quad channel per pin PMU. Each channel of the Edge4717D features a PMU that can force or measure voltage over a typical 15V I/O range, and supports 4 current ranges: ± 3.2 µA, ± 80 µA, ± 2 mA, ± 30 mA. The Edge4717D has an on-board window comparator per channel that provides two bits of information — DUT too high and DUT too low. There is also a monitor pin which provides a real time analog signal proportional to either the voltage or current measured at the DUT.