Datasheet4U Logo Datasheet4U.com

RCLAMP0524J - TVS Array

Download the RCLAMP0524J datasheet PDF. This datasheet also covers the RCLAMP0522J variant, as both devices belong to the same tvs array family and are provided as variant models within a single manufacturer datasheet.

General Description

RailClamps® are ultra low capacitance TVS arrays designed to protect high speed data interfaces.

Key Features

  • ‹ ESD protection for high-speed data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-5 (Lightning) 5A (8/20μs) IEC 61000-4-4 (EFT) 40A (5/50ns) Package design optimized for high speed lines Flow-Through design Protects four I/O lines Low capacitance: 0.3pF typical (I/O to I/O) Low clamping voltage Low operating voltage: 5V Solid-state silicon-avalanche technology SLP2710P8 8-pin package (2.7 x 1.0 x 0.58mm) RoHS/WEEE Compliant Lead Pitch: 0.5mm Lead finish: NiPdAu Marking: M.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (RCLAMP0522J_SemtechCorporation.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
RCLAMP0524P Ultra-low Capacitance Transient Voltage Suppressors TWGMC
RClamp0524PQ 4-Line Surge and ESD Protection Semtech
RClamp0524S Low Capacitance TVS Diode Array SEMTECH
RCLAMP0521P-N bi-directional TVS Diode DOWOSEMI
RClamp0521PA 1-Line ESD Protection SEMTECH

Other Datasheets by SEMTECH

Part Number Description
RCLAMP0524P Ultra Low Capacitance TVS Arrays
RClamp0524PA Ultra Low Capacitance TVS Arrays
RClamp0522PA Ultra Low Capacitance TVS Arrays
RCLAMP0502A Low Capacitance TVS Array
RCLAMP0502N Low Capacitance TVS Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - RailClamp® www.DataSheet4U.com Description RailClamps® are ultra low capacitance TVS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). The RClampTM0524J has a typical capacitance of only 0.30pF between I/O pins. This allows it to be used on circuits operating in excess of 3GHz without signal attenuation. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15kV air, ±8kV contact discharge). Each device is designed to protect four lines (two differential pairs).