SC1406 - PORTABLE PENTIUM II & III POWER SUPPLY CONTROLLER
SEMTECH
General Description
The SC1406 is a High Speed, High performance Hysteretic Mode controller.
It is part of a two chip solution, with the SC1405 Smart Driver, providing power to advanced micro-processors.
Key Features
Low Battery Detect and Undervoltage Lock-Out for the main Hysteretic controller to assure V-DC is within acceptable limits. An Over-Current comparator disables the main controller during an overcurrent condition using an externally programmable threshold.
Full PDF Text Transcription for SC1406 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
SC1406. For precise diagrams, and layout, please refer to the original PDF.
PORTABLE PENTIUM II & III POWER SUPPLY CONTROLLER PRELIMINARY - August 27, 1999 ® SC1406 TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com DESCRIPTION The SC14...
View more extracted text
-2111 FAX:805-498-3804 WEB:http://www.semtech.com DESCRIPTION The SC1406 is a High Speed, High performance Hysteretic Mode controller. It is part of a two chip solution, with the SC1405 Smart Driver, providing power to advanced micro-processors. It uses a Dynamic Set Point switching technique along with an ultra-fast comparator to provide the control signal to an external high speed Mosfet driver. A 5-bit DAC sets the output voltage, thus providing a voltage resolution of 25mV. SC1406 has two on-chip linear regulators which drive external PNP transistors with output voltage settings of 1.5V and 2.5Vdc. The linear regulator
SC1406 Datasheet
