SC475A Datasheet | SEMTECH

Synchronous Buck Controller with Dual-Level VOUT Transition Support POWER POWERMANAGEMENT MANAGEMENT Description The SC475A is a versatile, constant on-time synchronous buck, pseudo-fixed-frequency, PWM controller intended for notebook puters and other battery operated portable devices. The SC475A contains all the Features needed to provide cost-effective control of system elements needing voltage slewing. An integrated switch provides two resistorprogrammable DC output voltages controlled by the G0 input. .. Features VOUT Programmable 0.75V to 5.25V with Integrated Transition Support VBAT Range 3V to 25V Soft Shutoff at Output Current Sense Using Low-side RDS(ON) or Resistor Sensing Adjustable Cycle-by-Cycle Valley Current Limit 325k Hz Fixed-Frequency Constant On-Time for Fast Dynamic Response and Reduced Output Capacitance Automatic Smart Power Save† Internal Soft-Start Over-Voltage/Under-Voltage Fault Protection Power Good Output with Transition Blanking 1μA Typical Shutdown Current 500μA Typical Operating Current Tiny 3×3mm, 16 Pin MLP Package Low External Part Count Industrial Temperature Range 0.85% Internal Reference 1A/3A Non-Overlapping Gate Drive with Smart Driver™ Technology High Efficiency > 90% Device is Fully WEEE and Ro HS pliant †Patent The output voltage is adjustable from 0.75V to 5V. Additional Features include cycle-by-cycle current limit, voltage soft-start, under-voltage protection, programmable over-current protection, soft shutdown, automatic power save and non-overlapping gate drive. The SC475A provides an enable input and a power good output which is automatically blanked during output voltage transitions. The constant on-time topology provides fast dynamic response. The excellent transient response means that SC475A based solutions require less output capacitance than peting fixed-frequency converters. Switching frequency is constant until a step in load or line voltage occurs, at which time the pulse...