Datasheet4U Logo Datasheet4U.com

SC615 - Charge Pump Flash LED Driver

General Description

U 4 t m o .c

Key Features

  • ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ Charge Pump Flash LED Driver 500mA Output Current - Flash Mode 3.0V to 5.25V Input Range Two Selectable Modes - Flash and Spotlight External Flash Control Pin for Synchronization to a Camera Module or Graphics Controller Spotlight Mode Current Setting - 100mA Short Circuit, Over-Voltage, and Over-Temperature Protection Soft-Start Functionality Two Control Inputs for Maximum Versatility Shutdown Current < 2µA Micro Lead-frame Package MLPD-10, 3mm x 3mm SC615.

📥 Download Datasheet

Datasheet Details

Part number SC615
Manufacturer SEMTECH
File Size 232.39 KB
Description Charge Pump Flash LED Driver
Datasheet download datasheet SC615 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC6104 Triple-Output Power Supply SOUTHCHIP
SC6105 VOLTAGE MODE PWM POWER SUPPLY Silan Semiconductors
SC6105B VOLTAGE MODE PWM POWER SUPPLY Silan Semiconductors
SC6121 INFRARED REMOTE CONTROL TRANSMITTER Silan
SC6122 INFRARED REMOTE CONTROL TRANSMITTER Silan Semiconductors

Other Datasheets by SEMTECH

Part Number Description
SC615A Charge Pump Flash LED Driver
SC620 Octal LED Driver
SC621 LED Light Management Unit
SC621A Charge Pump
SC622 LED Light Management Unit Charge Pump

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
e charge pump designed speThe SC615 is a high-current e cifically for use with h white LEDs used in camera flash S applications. Only two small bucket capacitors are rea t quired to develop the output drive, providing a low EMI a to inductive boost regulators. solution compared D . w The SC615 has two modes of operation: Flash mode w and Spotlight mode. The SC615 is capable of delivering w 500mA of peak current for a duration of 500ms in Flash mode. In Spotlight mode the SC615 outputs 100mA and can remain enabled continuously. A minimum 0.5Ω sense resistor is used to set the current through the LED in both modes. This resistor dissipates up to 0.125W, reducing the power dissipation requirement of the SC615.