Datasheet4U Logo Datasheet4U.com

SX1701 - single-ended to differential conversion

Description

The SX1701 is an integrated LNA operating over a wide frequency range from 40 MHz to 2.5 GHz.

It is optimized for high OIP2 and OIP3 with minimum current consumption.

It also performs a single-ended to differential conversion.

Features

  • Single-ended input / Triple differential outputs Independent programmable gain for each channel: 6, 12 and 18 dB High Linearity: OIP2 of 57 dBm and OIP3 of 22 dBm Noise Figure of 7 dB 75 Ω Input impedance 100 Ω differential output impedance Current consumption of 130 mA with one channel enabled ESD protection (Normal ESD handling procedures should be observed) Very small package: MLPQ-16, 4 mm x 4 mm (equiv.

📥 Download Datasheet

Datasheet preview – SX1701

Datasheet Details

Part number SX1701
Manufacturer Semtech Corporation
File Size 560.52 KB
Description single-ended to differential conversion
Datasheet download datasheet SX1701 Datasheet
Additional preview pages of the SX1701 datasheet.
Other Datasheets by Semtech Corporation

Full PDF Text Transcription

Click to expand full text
SX1701 ADVANCED COMMUNICATION & SENSING PRODUCTS www.DataSheet4U.com SX1701 – Datasheet Highly linear wideband LNA Multi-channel, single-ended to differential conversion GENERAL DESCRIPTION The SX1701 is an integrated LNA operating over a wide frequency range from 40 MHz to 2.5 GHz. It is optimized for high OIP2 and OIP3 with minimum current consumption. It also performs a single-ended to differential conversion. Three independent output channels are available and the gain of each may be adjusted independently.
Published: |