Datasheet4U Logo Datasheet4U.com

UCLAMP1201H - 1-Line ESD Protection

General Description

The µClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDAs.

Key Features

  • large cross-sectional area junctions for conducting high transient currents. It offers superior electrical characteristics such as lower clamping voltage and no device degradation when compared to MLVs. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The µClampTM1201H is in a 2-pin, RoHS compliant, SOD-523 package. The leads are finished with leadfree matte tin. Each device will protect o.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UCLAMP1211P TVS Diode Leiditech
UCLAMP1211Z 1-Line ESD Protection Semtech
uClamp1511ZV 1-Line ESD & Surge Protection SEMTECH
uClamp0301PQ Low Voltage TVS SEMTECH
uClamp03321PQ 1-Line ESD & Surge Protection SEMTECH

Other Datasheets by SEMTECH

Part Number Description
UCLAMP1201P 1-Line ESD protection
UCLAMP1211P 1-Line ESD protection
UCLAMP0501H 1-Line ESD protection
UCLAMP0501P 1-Line ESD protection
UCLAMP0501T 1-Line ESD protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
µClampTM www.DataSheet4U.com 1-Line ESD Protection PROTECTION PRODUCTS - MicroClampTM Description The µClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDAs. It features large cross-sectional area junctions for conducting high transient currents. It offers superior electrical characteristics such as lower clamping voltage and no device degradation when compared to MLVs. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The µClampTM1201H is in a 2-pin, RoHS compliant, SOD-523 package.