UCLAMP2401T Datasheet PDF - Semtech Corporation 1-Line ESD protection Specs

UCLAMP2401T - 1-Line ESD protection

Datasheet Summary

Description

The µClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics.

Features

large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The µClampTM2401T is in a 2-pin, RoHS/WEEE compliant, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one line operating at 2.

Datasheet Details

Part number	UCLAMP2401T
Manufacturer	Semtech Corporation
File Size	202.81 KB
Description	1-Line ESD protection
Datasheet	UCLAMP2401T Datasheet
Additional preview pages of the UCLAMP2401T datasheet.

📁 Similar Datasheet

uClamp2011ZV - 1-Line ESD & Surge Protection (SEMTECH)

uClamp2501ZA - 2.5V TVS Diode (SEMTECH)

uClamp2804L - Lightning and ESD Protection (Semtech)

uClamp0301PQ - Low Voltage TVS (SEMTECH)

uClamp03321PQ - 1-Line ESD & Surge Protection (SEMTECH)

uClamp0511T - TVS Diode (Leiditech)

uClamp0601ZV - 1-Line ESD & Surge Protection (SEMTECH)

uClamp0761ZV - 1-Line ESD & Surge Protection (SEMTECH)

uClamp0801T - 1-Line ESD protection (Semtech)

UCLAMP1211P - TVS Diode (Leiditech)

Full PDF Text Transcription

Click to expand full text

Low Profile µClampTM www.DataSheet4U.com 1-Line ESD protection PROTECTION PRODUCTS - MicroClampTM Description The µClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The µClampTM2401T is in a 2-pin, RoHS/WEEE compliant, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.

Published: Apr 2, 2010 |