Datasheet4U Logo Datasheet4U.com

UCLAMP3311P - Low Voltage Clamp

General Description

The μClamp series of Transient Voltage Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications where low operating voltage is vital.

They offer superior electrical characteristics such as lower clamping voltage and no device degradation when compared to MLVs.

Key Features

  • ‹ Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (tp = 5/50ns) Cable Discharge Event (CDE) Ultra-small package (1.0 x 0.6 x 0.5mm) Protects one data line Low clamping voltage Working voltage: 3.3V Low leakage current Solid-state silicon-avalanche technology ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ ‹ Mechanical Characteristics SLP1006P2 package RoHS/WEEE Compliant Nominal Dimensions: 1.0 x 0.6 x 0.5 mm Lead Finish: NiPdAu Molding compou.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
uClamp3311PQ Low Voltage uClamp TVS SEMTECH
uClamp3311ZV 1-Line ESD & Surge Protection SEMTECH
uClamp3321ZA 3.3V ESD Protection Semtech
uClamp3381P 3.3V ESD & Surge Protection Semtech
uClamp0301PQ Low Voltage TVS SEMTECH

Other Datasheets by SEMTECH

Part Number Description
uClamp3311T 1-Line ESD protection
UCLAMP3301D Low Voltage Clamp
UCLAMP3301H Low Voltage UClampTM
UCLAMP3301P Low Voltage Clamp
UCLAMP3304A 4-Line ESD protection Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Low Voltage μClampTM www.DataSheet4U.com for ESD and CDE Protection PROTECTION PRODUCTS - MicroClampTM Description The μClamp series of Transient Voltage Suppressors (TVS) are designed to replace multilayer varistors (MLVs) in portable applications where low operating voltage is vital. They offer superior electrical characteristics such as lower clamping voltage and no device degradation when compared to MLVs. They are designed to protect sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD), lightning, electrical fast transients (EFT), and cable discharge events (CDE). The μClampTM3311P is constructed using Semtech’s proprietary EPD process technology.