Datasheet4U Logo Datasheet4U.com

uClamp0511PQ - 1-Line ESD protection

General Description

µClamp® series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

They feature large cross-sectional area junctions for conducting high transient currents.

Key Features

  • Transient protection for data lines to IEC 61000-4-2 (ESD) ±30kV (contact & air) IEC 61000-4-4 (EFT) 40A (tp = 5/50ns) Cable Discharge Event (CDE).
  • Ultra-small package (1.0 x 0.6 x 0.5mm).
  • Protects one I/O or power line.
  • Low clamping voltage.
  • Working voltage: 5V.
  • Low leakage current.
  • Solid-state silicon-avalanche technology.
  • AEC-Q100 Grade 1 Qualified Mechanical Characteristics.
  • SLP1006P2 package.
  • Pb-Free,.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
uClamp0511T TVS Diode Leiditech
uClamp0301PQ Low Voltage TVS SEMTECH
uClamp03321PQ 1-Line ESD & Surge Protection SEMTECH
uClamp0601ZV 1-Line ESD & Surge Protection SEMTECH
uClamp0761ZV 1-Line ESD & Surge Protection SEMTECH

Other Datasheets by SEMTECH

Part Number Description
UCLAMP0511P 1-Line ESD protection
uClamp0511T 1-Line ESD protection
UCLAMP0501H 1-Line ESD protection
UCLAMP0501P 1-Line ESD protection
UCLAMP0501T 1-Line ESD protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
μClamp0511PQ μClamp® 1-Line ESD Protection PROTECTION PRODUCTS Description µClamp® series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. They feature large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClamp®0511PQ is in a 2-pin, SLP1006P2 package. It measures 1.0 x 0.6 x 0.5mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one bidirectional line operating at ±5 volts. It gives the designer the flexibility to protect single lines in applications where arrays are not practical.