Datasheet4U Logo Datasheet4U.com

uClamp0511T - 1-Line ESD protection

General Description

The μClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics.

Key Features

  • large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClampTM0511T is in a 2-pin, RoHS/WEEE compliant, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one line operating at 5.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
uClamp0511T TVS Diode Leiditech
uClamp0301PQ Low Voltage TVS SEMTECH
uClamp03321PQ 1-Line ESD & Surge Protection SEMTECH
uClamp0601ZV 1-Line ESD & Surge Protection SEMTECH
uClamp0761ZV 1-Line ESD & Surge Protection SEMTECH

Other Datasheets by SEMTECH

Part Number Description
UCLAMP0511P 1-Line ESD protection
uClamp0511PQ 1-Line ESD protection
UCLAMP0501H 1-Line ESD protection
UCLAMP0501P 1-Line ESD protection
UCLAMP0501T 1-Line ESD protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Low Profile μClampTM 1-Line ESD protection PROTECTION PRODUCTS - MicroClampTM Description The μClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClampTM0511T is in a 2-pin, RoHS/WEEE compliant, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.