Datasheet4U Logo Datasheet4U.com

uClamp0544P - 4-Line ESD Protection

General Description

The μClampTM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

Key Features

  • large cross-sectional area junctions for conducting high transient currents. TVS diodes offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClampTM0544P is in a 10-pin, RoHS/WEEE compliant, SLP2510P8 package. It measures 2.5 x 1.0 with a nominal height of 0.58mm. The leads are spaced at a pitch of 0.5mm and are finished with lead-free NiPdAu. They are designed for easy PCB layout by allowing.

📥 Download Datasheet

Other Datasheets by SEMTECH

Part Number Description
uClamp0541Z 1-Line ESD Protection
UCLAMP0501H 1-Line ESD protection
UCLAMP0501P 1-Line ESD protection
UCLAMP0501T 1-Line ESD protection
UCLAMP0502P 2-Line ESD protection
UCLAMP0502T 2-Line ESD protection
UCLAMP0504A 4-Line ESD protection Array
UCLAMP0504T Low Profile Clamp 4-Line ESD Protection
UCLAMP0505A 5-Line ESD protection Array
UCLAMP0506A 5-Line ESD protection Array

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - MicroClampTM Description The μClampTM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace single line devices such as multilayer varistors (MLVs) in space constrained applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. TVS diodes offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClampTM0544P is in a 10-pin, RoHS/WEEE compliant, SLP2510P8 package. It measures 2.5 x 1.0 with a nominal height of 0.58mm. The leads are spaced at a pitch of 0.