Datasheet4U Logo Datasheet4U.com

Edge142 - Per Pin timing Deskew w 4x2 Cross Point Switch

General Description

The Edge142 is a 4 X 2 cross point switch with output edge deskew capability.

Manufactured in a high performance bipolar process, it is designed primarily for channel deskew applications in VLSI and Mixed-Signal test equipment.

Key Features

  • Very Narrow ( 850 MHz.
  • Independent Delay Adjustments for Positive and Negative Transitions.
  • Delay Range of 1.5 ns.
  • Trailing Edge Adjust Range of 300 ps.
  • Small Footprint: 52-pin MQFP Package (10 X 10 mm) with Internal Heat Spreader or Die Form.

📥 Download Datasheet

Datasheet Details

Part number Edge142
Manufacturer SEMTECH
File Size 179.49 KB
Description Per Pin timing Deskew w 4x2 Cross Point Switch
Datasheet download datasheet Edge142 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EDGE211 Dual Pin Electronics Driver Semtech Corporation
EDGE4707B Quad Channel Per-Pin Precision Measurement Semtech Corporation
EDGE4717D Per Pin Precision Measurement Semtech Corporation
EDGE629 1 GHz Timing Deskew and Quad Fanout Element Semtech Corporation
EDGE6420 Per-Pin Electronics Companion DAC Semtech Corporation

Other Datasheets by SEMTECH

Part Number Description
Edge118 Low Skew Clock Spreader
Edge646 Pin Electronics Driver/ Window Comparator/ and Switch Matrix
Edge647 Pin Electronics Driver/ Window Comparator/ and Switch Matrix
Edge649 Octal Pin Electronics Driver/Receiver
Edge692 200 MHz Monolithic Dual Pin Electronics Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Edge142 Per Pin timing Deskew w 4x2 Cross Point Switch EDGE HIGH-PERFORMANCE PRODUCTS Description The Edge142 is a 4 X 2 cross point switch with output edge deskew capability. Manufactured in a high performance bipolar process, it is designed primarily for channel deskew applications in VLSI and Mixed-Signal test equipment. Any of the four input signals may be selected as the source for either output. The 142 performs test head multiplexing, adjacent channel multiplexing, and signal buffering for both the drive and receive signals, in addition to timing deskew. The delay value (and resolution) is controlled via an external voltage DAC. The delay element is designed specifically to be monotonic and very stable while delaying a very narrow pulse over a limited delay range.