RClamp0564P Datasheet | SEMTECH

Femto Farad Rail Clamp® 4-Line, 170f F ESD Protection PROTECTION PRODUCTS Description RClamp®0564P is an ultra low capacitance ESD protection device specifically designed to protect highspeed differential lines. It offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation RClamp0564P Features extremely good ESD protection characteristics highlighted by low peak ESD clamping voltage, and high ESD withstand voltage (+/-10k V contact per IEC 61000-4-2). RClamp0564P is designed to minimize both the ESD peak clamping and the TLP clamping. Package inductance is reduced at each pin resulting in lower peak ESD clamping voltage. RClamp0564P has a typical capacitance of 0.17p F allowing it to be used in high bandwidth applications such as HDMI 2.0 4K/2K, Thunderbolt, and USB 3.1. Each device will protect four high-speed data lines operating up to 5 volts. RClamp0564P is in a 5-pin SGP2010N5 package measuring 2.0 x 1.0mm with a nominal height of 0.60mm. The leads have a nominal pin-to-pin pitch of 0.40mm. Flow- through package design simplifies PCB layout and maintains signal integrity on high-speed lines. Features - High ESD Withstand Voltage ŒŒ IEC 61000-4-2 (ESD) 10k V (contact) - Ultra-Low Capacitance: 0.17p F Typical - Very Small PCB Area - Protects Four High-Speed Data Lines - Working Voltage: 5V - Low Dynamic Resistance: 0.65 Ohms - Large Operating Bandwidth: 12GHz - Solid-State Silicon-Avalanche Technology Mechanical Characteristics - SGP2010N5 Package - Pb-Free, Halogen Free, Ro HS/WEEE pliant - Nominal Dimensions: 2.0 x 1.0 x 0.60 mm - Lead Pitch: 0.40mm - Lead Finish: Ni Pd Au - Marking : Marking Code - Packaging : Tape and Reel Applications - HDMI 1.4, HDMI1.4b and HDMI 2.0 - USB 3.0 and USB 3.1 - USB Type-C - Thunderbolt - MIPI / MDDI Nominal...