Datasheet4U Logo Datasheet4U.com

SC2615 - Complete DDR Power Solution

General Description

The SC2615 is a fully integrated, Three in One, Linear DDR power solution providing power for the VDDQ and the VTT rails.

The SC2615 completely adheres to the ACPI sleep state power requirements per Intel R motherboard specifications.

Key Features

  • ‹ Single chip solution adheres to ACPI sleep state requirements using BF_CUT UVLO on 3.3V and 12V Internal S3 state LDO for VDDQ supplies 650 mA Dual thermal shutdown Fast transient response Internal VTT regulator Sinks and Sources 1.8A (Min) ‹ Power good output ‹ 18 pin MLP package ‹ ‹ ‹ ‹ ‹.

📥 Download Datasheet

Datasheet Details

Part number SC2615
Manufacturer SEMTECH
File Size 245.41 KB
Description Complete DDR Power Solution
Datasheet download datasheet SC2615 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC261 (SC2xx) Thyristors / TRIAC Semitronics
SC261 SFP/SFP+ CAGES&CONNECTOR VITALCONN
SC260 (SC2xx) Thyristors / TRIAC Semitronics
SC2602 Synchronous Voltage Mode Controller Semtech Corporation
SC2602A Synchronous Voltage Mode Controller Semtech Corporation

Other Datasheets by SEMTECH

Part Number Description
SC2612A 600kHz/200kHz Step-Down DC/DC Converter
SC2612C 600kHz/200kHz Step-Down DC/DC Converter
SC2612E 500kHz Step-Down DC/DC Converter
SC2616 Complete DDR Power Solution
SC2618 Miniature PWM Controller for Buck Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Complete DDR Power Solution www.DataSheet4U.com SC2615 POWER MANAGEMENT Description The SC2615 is a fully integrated, Three in One, Linear DDR power solution providing power for the VDDQ and the VTT rails. The SC2615 completely adheres to the ACPI sleep state power requirements per Intel R motherboard specifications. A linear regulator controller provides the high current of the VDDQ during S0, via an external Power MOSFET, while an internal 1.8A (min) sink/ source regulator supplies the termination voltage. In addition to these two blocks, an Internal LDO provides VDDQ power during S3, capable of sourcing 650 mA. The SC2615 uses IntelR defined Latched BF_CUT signal which is also used to drive the external Blocking MOSFET.