Datasheet4U Logo Datasheet4U.com

SC4201 - Multi Phase Link Controller

General Description

The SC4201 is a multi-phase link controller, ideal for isolated and non-isolated applications.

Its frequency of operation can be programmed in excess of 1.5MHz and can be easily synchronized to an external faster frequency.

The SC4201 output frequencies can be set to 2/4 or 3 phase operation.

Key Features

  • ‹ ‹ ‹ ‹ Low cost/small size Programmable frequency up to 2MHz, each phase Synchronized to faster frequency Programmable 2/4 or 3 phase operation.

📥 Download Datasheet

Datasheet Details

Part number SC4201
Manufacturer SEMTECH
File Size 204.24 KB
Description Multi Phase Link Controller
Datasheet download datasheet SC4201 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC420 Synchronous Power MOSFET Driver Semtech Corporation
SC4205 Very Low Dropout 1 Amp Regulator Semtech Corporation
SC420A Synchronous Power MOSFET Driver Semtech Corporation
SC4211 Very Low Input /Very Low Dropout 1 Amp Regulator Semtech Corporation
SC4215 Very Low Input / Very Low Dropout 2 Amp Regulator With Enable Semtech Corporation

Other Datasheets by SEMTECH

Part Number Description
SC4210 8-Pin N-FET Linear Regulator Controller
SC4210A 8-Pin N-FET Linear Regulator Controller
SC4211H Very Low Input /Very Low Dropout 1Amp Regulator
SC4212B Very Low Input /Very Low Dropout 1 Amp Regulator
SC4250 Negative Voltage / Hot Swap Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Multi-Phase Link Controller POWER MANAGEMENT Description The SC4201 is a multi-phase link controller, ideal for isolated and non-isolated applications. Its frequency of operation can be programmed in excess of 1.5MHz and can be easily synchronized to an external faster frequency. The SC4201 output frequencies can be set to 2/4 or 3 phase operation. A single pin can either set a 4 phase operation (each phase is 90 degrees apart) or 3 phase operation (120 degrees apart).