Datasheet4U Logo Datasheet4U.com

UCLAMP1211Z - 1-Line ESD Protection

General Description

μClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD.

They are designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics.

Key Features

  • large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClamp®1211Z is in a 2-pin SLP0603P2X3 package. It measures 0.6 x 0.3 mm with a nominal height of only 0.25mm. The leads are finished with lead-free NiPdAu. Each device will protect one line operating at 12 volts. It gives the designer the flexibility t.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UCLAMP1211P 1-Line ESD protection Semtech Corporation
UCLAMP1211P TVS Diode Leiditech
UCLAMP1201H 1-Line ESD Protection Semtech Corporation
UCLAMP1201P 1-Line ESD protection Semtech Corporation
UCLAMP0501H 1-Line ESD protection Semtech Corporation

Other Datasheets by SEMTECH

Part Number Description
uClamp1511ZV 1-Line ESD & Surge Protection
uClamp0301PQ Low Voltage TVS
uClamp03321PQ 1-Line ESD & Surge Protection
uClamp0601ZV 1-Line ESD & Surge Protection
uClamp0761ZV 1-Line ESD & Surge Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - Z-PakTM Description μClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. They features large cross-sectional area junctions for conducting high transient currents. These devices offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClamp®1211Z is in a 2-pin SLP0603P2X3 package. It measures 0.6 x 0.3 mm with a nominal height of only 0.25mm. The leads are finished with lead-free NiPdAu. Each device will protect one line operating at 12 volts.