SC1146 Datasheet | SEMTECH

DESCRIPTION The SC1146 is the latest, high performance, multiphase (PWM) controller designed for high power microprocessors requiring ultra fast transient response. The SC1146 is programmable for the voltage range required by the latest Microprocessors . Utilizing a novel and unique design, the controller distributes the output load across (up to) four converter channels by digitally phase shifting the PWM outputs. This approach greatly reduces the stress and heat on the output stage ponents while lowering input ripple current by as much as 80%. Accurate current sharing among the four phases is achieved by precision design techniques and trimming of critical elements. The high speed transconductance error amplifier is externally initialized using a soft-start capacitor allowing the controller to “wake-up” without overshoot, thus protecting the low voltage microprocessor loads. The output drive voltage to the power MOSFETs is programmable to minimize switching losses in the drive circuitry. The output voltage is digitally programmable by means of a 5 bit DAC (new codes). A single resistor programs the master clock frequency (8MHz max) or the clock can be supplied by an external source where exact frequency control is desired. The number of operating phases is programmed independently of the external clock. The parts Features under-voltage lock-out with hysteresis and over-current protection. Features - = Allows use of small surface mount ponents - = Ultra fast transient recovery time - = Dramatic reduction of input ripple current and out- = 5-bit programmable DAC for the latest, lower - = Wide, High frequency operating range - = Selectable 2, 3, 4 phase operation - = +5 Volt only operation eliminates the need for - = Precision load current sharing,1%PWM match - = Selectable internal or external clock - = Soft start/UVLO/Over current protection APPLICATIONS - = High end servers and workstations - = High current/Ultra-fast transient microprocessors ORDERING INFORMATION DEVICE (1)...