TCLAMP0602N
TCLAMP0602N is Low Capacitance TVS manufactured by SEMTECH.
..
Low Capacitance TVS for Ethernet and Tele Interfaces
Features
Transient protection for high-speed data lines to
Bellcore 1089 (Intra-Building) 100A (2/10μs) IEC 61000-4-2 (ESD) ±15k V (air), ±8k V (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) IEC 61000-4-5 (Lightning) L5, 95A (8/20μs) Protects two lines in mon and differential mode Low capacitance (12p F line-to-line) Low operating voltages (6V) Low clamping voltage Small SLP Package saves board space Solid-state technology
PROTECTION PRODUCTS
- Trans ClampΤΜ Description
A Trans ClampΤΜ is a low capacitance TVS array designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive ponents which are connected to data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and Lightning. These devices integrate low capacitance, surge-rated pensation diodes with a high power transient voltage suppressor (TVS). The pensation diodes are arranged in a bridge pattern allowing the device to be connected in mon mode and/or differential mode. This allows the designer maximum flexibility and reduces parts count. The capacitance of the device is limited to 12p F maximum from line-to-line to ensure correct signal transmission on high-speed lines. These devices may be used to meet Bellcore GR-1089CORE short-haul (intra-building) surge requirements and will withstand a minimum 100 A surge for a 2/10μs pulse. The TClamp TM0602N is in a 10-pin, Ro HS/WEEE pliant, SLP2626P10 package. It measures 2.6 x 2.6 x 0.60mm. The leads are spaced at a pitch of 0.5mm and are finished with lead-free Ni Pd Au. They are particularly well suited for applications where board space is at a premium such as integrated connectors/ magnetics and T1/E1 equipment.
Mechanical Characteristics
SLP2626P10 10L package Ro HS/WEEE pliant Nominal Dimensions: 2.6 x 2.6 x 0.60 mm...
