UCLAMP0506A
UCLAMP0506A is 5-Line ESD protection Array manufactured by SEMTECH.
μClamp TM .. 5-Line ESD protection Array
PROTECTION PRODUCTS
- Micro Clamp TM Description
The μClamp TM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. Each device requires less than 2.9mm2 of PCB area and will protect up to five lines. They are bidirectional devices and may be used on lines where the signal polarities swing above and below ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. These devices may be used to meet the immunity requirements of IEC 61000-4-2, level 4. The small SC89 package makes them ideal for use in portable electronics such as cell phones, PDAs, notebook puters, and digital cameras. u Clamp0506A
Features
Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15k V (air), ±8k V (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects five bidirectional I/O lines 1.7 x 1.7 x 0.6mm Ultra-small SC-89 package (1.7 0.6mm) 2 requires less than 2.9mm of PCB area Working voltage: 5V Low leakage current Low operating and clamping voltages Solid-state silicon-avalanche technology
Mechanical Characteristics
SC-89 (SOT-666) package Ro HS / WEEE pliant Molding pound flammability rating: UL 94V-0 Marking : Marking Code and pin 1 indicator Weight: 2.9mg (typical) Packaging : Tape and Reel per EIA 481 Cellular Handsets and Accessories Cordless Phones Notebooks and Handhelds Portable Instrumentation Digital Cameras Peripherals MP3 Players
Applications
Dimensions
1.70 0.50
Schematic & PIN Configuration
Maximum Dimensions (mm)
Revision 03/21/07 1
SC-89...
