UCLAMP0511P
UCLAMP0511P is 1-Line ESD protection manufactured by SEMTECH.
μClamp TM .. 1-Line ESD protection
PROTECTION PRODUCTS
- Micro Clamp Description
The μClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications. It Features large cross-sectional area junctions for conducting high transient currents. It offers superior electrical characteristics such as lower clamping voltage and no device degradation when pared to MLVs. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClamp TM0511P is in a 2-pin, Ro HS/WEEE pliant, SLP1006P2 package. It measures 1.0 x 0.6 x 0.5mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free Ni Pd Au. Each device will protect one bidirectional line operating at ±5 volts. It gives the designer the flexibility to protect single lines in applications where arrays are not practical. They may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15k V air, ±8k V contact discharge). The bination of small size and high ESD surge capability makes them ideal for use in portable applications such as cellular phones, digital cameras, and MP3 players.
TM u Clamp0511P
Features
Transient protection for data lines to
IEC 61000-4-2 (ESD) ±15k V (air), ±8k V (contact) IEC 61000-4-4 (EFT) 40A (tp = 5/50ns) Cable Discharge Event (CDE) Ultra-small package (1.0 x 0.6 x 0.5mm) Protects one I/O or power line Low clamping voltage Working voltage: 5V Low leakage current Solid-state silicon-avalanche technology
Mechanical Characteristics
SLP1006P2 package Molding pound flammability rating: UL 94V-0 Marking : Marking code Packaging : Tape and Reel Lead Finish: Ni Pd Au Ro HS/WEEE pliant
Applications
Cellular Handsets & Accessories Cordless Phones Personal Digital Assistants (PDAs)...
