SX15 Datasheet | Sensym

- Series PRESSURE SENSORS Features .. GENERAL DESCRIPTION The SX Series of pressure sensors provide the most cost effective method of measuring pressures up to 150 psi. These sensors were specifically designed to be used with non-corrosive and non-ionic media, such as air and dry gases. Convenient pressure ranges are available to measure differential, gage, and absolute pressures from 0 to 1 psi (SX01) up to 0 to 300 psi (SX7300D). The Absolute (A) devices have an internal vacuum reference and an output voltage proportional to absolute pressure. The Differential (D) devices allow application of pressure to either side of the diaphragm and can be used for gage or differential pressure measurements. However, 300 psi (SX7300D) can be applied to pressure port P2 only. Pressure port P1 is able to handle operating pressures up to 150 psi only. This product is packaged either in Sen Sym´s standard low cost chip carrier "button" package, a plastic ported "N" package, a metal TO can package or a dual inline package (DIP). All packages are designed for applications where the sensing element is to be integral to the OEM equipment. These packages can be O-ring sealed, epoxied, and/or clamped onto a pressure fitting. A closed bridge four-pin SIP configuration is provided for electrical - 0 ... 1 to 0 ... 300 psi - Absolute, Differential and Gage Devices - High Impedance Bridge - Low Power Consumption for Battery Operation Scale: 5mm ½ inch APPLICATIONS - Industrial Controls - Pneumatic Controls - Medical Instrumentation - Barometry EQUIVALENT CIRCUIT connection to the button or "N" package. The TO can offers a 5-pin open bridge configuration. Because of its high-impedance bridge, the SX Series is ideal for portable and low power or battery operated systems. Due to its low noise, the SX is an excellent choice for medical and low pressure measurements. For further technical information please contact the factory. ELECTRICAL CONNECTION Button Sensor...