AP3842G Datasheet | Shanghai SIM-BCD Semiconductor

Description Features AP384XG The AP384XG is a Green Mode PWM controller. It is specially designed for off-line AC-DC adapter and battery charger applications where both needs for low standby power and high efficiency in normal operation are required. In a well designed product, the AP384XG is capable to allow the system consuming only 0.5W power in standby mode. In normal operation, the AP384XG features adjustable frequency by using an external resistor and capacitor bination. When output power falls below a given level, the IC automatically switches to the skip mode, which works by skipping switching cycles. The AP384XG also features low start-up and low standby operating current for its special topology. - Green Mode PWM Controller to Support the "Blue Angel" Norm - Adjustable Skip Cycle Mode Operation - Low Start-up Current: 50μA (Typ.) - Low Standby Operating Current: 6m A - Internal Leading Edge Blanking - Adjustable Oscillator Frequency up to 500KHz - Totem Pole Output - Under Voltage Lock Out (UVLO) - Over-Temperature Protection - Pin to Pin Replacement for AZ384XA Applications The AP384XG provides accurate protection against over-temperature, over-current and maximal output - Off-line Converter power. - DC-DC Converter - DVD/STB Power Supply The AP384XG is available in SOIC-8 and DIP-8 - Power Adapter packages. - CRT Monitor Power Supply Option 1 SOIC-8 Option 2 DIP-8 Figure 1. Package Types of AP384XG Jul. 2013 Rev. 2. 0 BCD Semiconductor Manufacturing Limited GREEN MODE PWM CONTROLLER Pin Configuration M Package (SOIC-8) P 1 FB 2 CS 3 RT/CT 4 8 REF 7 VCC 6 OUTPUT 5 GND Data Sheet AP384XG P Package (DIP-8) P 1 FB 2 CS 3 RT/CT...