SAF Datasheet | Sharma Electro

.. Sharma Tantalum Capacitors Ro HS pliant SAF SERIES INTRODUCTION SAF Series molded Tantalum Chip Capacitors with Built-in fuse, are developed to provide safety to the PCB by opening the circuit in case of abnormal voltage or current. Features : HIGH HEAT RESISTANCE MAKES IT SUITABLE FOR ALL TYPES OF SOLDERING - - FUSE CHARACTERISTICS DESIGNED TO PREVENT FIRE OR SMOKE C & D CASE SIZES DESIGNED TO OPEN IN<100 SEC AT 1.5A OR<5SEC AT - B, 5A. D & F CASE SIZES OPEN IN <5 SEC AT 5A. (REFERENCE GRAPH G1 FOR FUSING TIME PATTERN.) - LOW ESR OF <2 OHMS AT 1MHZ LOW INDUCTANCE OF 5n H AT 200 MHz. MEET IEC SPEC QC 300801/US0001 AND EIA J RC- 3813 & JIS C - PONENTS 5102. REEL PACKING STDS - EIA J RC-1009B /EIA 481/IEC 286-3. EPOXY MOLDED PONENTS WITH CONSISTENT DIMENSIONS AND FINISH. SURFACE GRAPH G1 - ENGINEERED FOR AUTOMATIC ONSERTION. - PATIBLE WITH ALL POPULAR HIGH SPEED ASSEMBLY MACHINES. GENERAL SPECIFICATIONS CAPACITANCE RANGE: 1.0µF to 68µF. VOLTAGE RANGE: 10VDC to 50VDC. CAPACITANCE TOLERANCE: ±20%(M), ±10%(K), ( ±5%(J) - UPON REQUEST) TEMPERATURE RANGE: -55 to +125°C with DERATING ABOVE 85°C ENVIRONMENTAL CLASSIFICATION: 55/125/56(IEC68-2) DISSIPATION FACTOR: 0.1µF to 1µF 4% Max 1.5 µF to 22 µF 5% MAX, 33µF 8% Max. LEAKAGE CURRENT: NOT MORE THAN 0.01CV µA or 0.5 µA WHICHEVER IS GREATER FAILURE RATE: 1% PER 1000 HRS. LIFE TEST DETAILS CAPACITORS SHALL WITHSTAND RATED DC VOLTAGE APPLIED AT 85°C FOR 2000 HRS. OR DERATED DC VOLTAGE APPLIED AT 125°C FOR 1000 HRS. AFTER THE TEST: 1. CAPACITANCE CHANGE SHALL NOT EXCEED ±10% OF INITIAL VALUE. 2. DISSIPATION FACTOR SHALL BE WITHIN THE NORMAL SPECIFIED LIMITS. 3. DC LEAKAGE CURRENT SHALL BE WITHIN 125% OF NORMAL LIMIT. 4. NO REMARKABLE CHANGE IN APPEARANCE. MARKINGS TO REMAIN LEGIBLE. FUSING TIME SAH SERIES RATINGS AND CASE CODES CAPACITANCE CODE 104 154 224 334 474 684 105 155 225 µF 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 D2, D C D2, D C D2, D B C D2, D B C D2,...