SAJ Datasheet | Sharma Electro

FEATURES : - HIGH SOLDER HEAT RESISTANCE - 269°C, 5 TO 10 SECS. ULTRA PACT SIZES IN EXTENDED RANGE (BOLD PRINT) ALLOWS HIGH DENSITY - PONENT MOUNTING. LOW PROFILE WITH HEIGHT 1.2MM MAX (A2 & B2) AND 1.5MM MAX (C2) FOR USE ON - PCB’S, WHERECAPACITORS HEIGHT IS CRITICAL. MEET IEC SPEC QC 300801/US0001 AND EIA 535BAAC. REEL PACKING STDS- EIAJ - PONENTS RC-1009B /EIA 481/IEC 286-3. MOLDED PONENTS WITH CONSISTENT DIMENSIONS AND SURFACE FINISH. - EPOXY ENGINEERED FOR AUTOMATIC ONSERTION. - PATIBLE WITH ALL POPULAR HIGH SPEED ASSEMBLY MACHINES. GENERAL SPECIFICATIONS CAPACITANCE RANGE: 0.1 µF To 330 µF. VOLTAGE RANGE: 4VDC to 50VDC. CAPACITANCE TOLERANCE: ±20%(M), ±10%(K), (±5%(J) - UPON REQUEST). TEMPERATURE RANGE: -55 TO +125°C WITH DERATING ABOVE 85°C. ENVIRONMENTAL CLASSIFICATION: 55/125/56 (IEC68-2). DISSIPATION FACTOR: 0.1 TO 1 µF 4% MAX,1.5 TO 6.8 µF 6% MAX, 10 TO 330 µF 8% MAX. LEAKAGE CURRENT: NOT MORE THAN 0.01CV µA or 0.5 µA WHICHEVER IS GREATER. FAILURE RATE: 1% PER 1000 HRS. LIFE TEST DETAILS CAPACITORS SHALL WITHSTAND RATED DC VOLTAGE APPLIED AT 85°C FOR 2000 HRS OR DERATED DC VOLTAGE APPLIED AT 125°C FOR 1000 HRS. AFTER THE TEST: 1. CAPACITANCE CHANGE SHALL NOT EXCEED ±10% OF INITIAL VALUE. 2. DISSIPATION FACTOR SHALL BE WITHIN THE NORMAL SPECIFIED LIMITS. 3. DC LEAKAGE CURRENT SHALL BE WITHIN 125% OF NORMAL LIMIT. 4. NO REMARKABLE CHANGE IN APPEARANCE. MARKINGS TO REMAIN LEGIBLE. CASE DIMENSIONS IN MILLIMETERS (INCHES) CASE R A2 A B2 B H C2 C D2 D E EIA/IEC 2012 3216L 3216 3528L 3528 4726 6032L 6032 6045 7343 7343H (TALLER) L 2.05 ±0.2 (0.08 ±0.008) 3.2 ±0.2 (0.126 ±0.008) 3.2 ±0.2 (0.126 ±0.008) 3.5 ±0.2 (0.138 ±0.008) 3.5 ±0.2 (0.138 ±0.008) 4.8 ±0.2 (0.189 ±0.008) 5.8 ±0.2 (0.228 ±0.008) 6.0 ±0.3 (0.236 ±0.012) 5.8 ±0.3 (0.228 ±0.012) 7.3 ±0.3 (0.287 ±0.012) 7.3 ±0.3 (0.287 ±0.012) W 1.3 ±0.2 (0.05 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 2.8 ±0.2 (0.110 ±0.008) 2.8 ±0.2 (0.110 ±0.008) 2.6 ±0.2 (0.102 ±0.008) 3.2 ±0.2 (0.126 ±0.008) 3.2...