Datasheet4U Logo Datasheet4U.com

GP1S09 - Photointerrupter with Connector

Key Features

  • 1. Snap-in mounting type 2. Can be mounted on 2 different thickness boards ( 1.0mm, 1.6mm ) 3. 3-pin connector terminal 4. Wide gap between light emitter and detector ( 5mm ) Photointerrupter with Connector s Outline Dimensions 5.9 + 1.0 - 0.5 ± 0.3 ( Unit : mm ) Internal connection diagram 3 1 Anode 2 GND 2 3 Collector 1 6.0 3.0 0.8 ± 0.1 Slit width 8.4 4.0 21.8 16.0 0.9 6.5 4.5 5.0 4.5 10.5 s.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
GP1S092HCPI Surface Mount Type Photointerrupter Sharp Electrionic
GP1S092HCPIF Compact Transmissive Photointerrupter Sharp Electrionic
GP1S093HCZ0F Compact Transmissive Photointerrupter Sharp Electrionic
GP1S094HCZ0F Compact Transmissive Photointerrupter Sharp Electrionic
GP1S096HCZ0F Compact Transmissive Photointerrupter Sharp Electrionic

Other Datasheets by Sharp Corporation

Part Number Description
GP1S01 HIGH SPEED PHOTOINTERRUPTER
GP1S01F HIGH SPEED PHOTOINTERRUPTER
GP1S05 WIDE GAP HIGH SENSING ACCURACY TYPE PHOTOINTERRUPTER
GP1S06 High Sensing Accuracy Type Photointerrupter
GP1S07 SUBMINIATURE PHOTOINTERRUPTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
GP1S09 GP1S09 s Features 1. Snap-in mounting type 2. Can be mounted on 2 different thickness boards ( 1.0mm, 1.6mm ) 3. 3-pin connector terminal 4. Wide gap between light emitter and detector ( 5mm ) Photointerrupter with Connector s Outline Dimensions 5.9 + 1.0 - 0.5 ± 0.3 ( Unit : mm ) Internal connection diagram 3 1 Anode 2 GND 2 3 Collector 1 6.0 3.0 0.8 ± 0.1 Slit width 8.4 4.0 21.8 16.0 0.9 6.5 4.5 5.0 4.5 10.5 s Applications 1. Copiers 2. Printers 3. Facsimiles 1.7 g 5.9 0.6 1.7 9.9 3 2 1 2 - 1.6 4.0 1.6 1.5 0.9 2 - 4.0 2 - 8.0 11.8 2 - 3.0 2 - 0.9 10.2 2 - 0.9 * Unspecified tolerances shall be as follows ; Dimensions(d) Tolerance d< 5.0 ± 0.15 5.0 <= d< 15.0 ± 0.2 15.0 <= d ± 0.3 * ( ) : Reference dimensions g MOLEX JAPAN CO., LTD.