GP1A073LCS
Overview
GP1A73AJ000F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remotemount or off-board designs.
- Transmissive with OPIC output
- Highlights :
- Special position hooks compatible with 3 different wall thicknesses (1.0, 1.2, 1.6mm)
- Hinged snap insertion
- Wide operation voltage (2.7 to 5.5V)
- Key Parameters :
- Gap Width : 5mm
- Slit Width (detector side): 0.5mm
- Package : 17×12.8×8mm (without connector and hooks)
- Connector : Tyco Electronics AMP K.K. (PN : 292133-3) or SUMIKO TEC CO., LTD. (PN : GH4A003P000ZA)
