GP1A57HRJ00F
GP1A57HRJ00F is OPIC Output Case package Transmissive Photointerrupter manufactured by Sharp Corporation.
Description
GP1A57HRJ00F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, resulting in a through-hole design. This device has a wide gap.
- Agency approvals/pliance
1. pliant with Ro HS directive
- Applications
1. General purpose detection of object presence or motion. 2. Example : Printer, FAX, Optical storage unit
- Features
1. Transmissive with OPIC output 2. Highlights :
- Vertical Slit for alternate motion detection
- Output Low Level at intercepting optical path
- Wide gap width (10mm)
- Positioning Pin to prevent misalignment 3. Key Parameters :
- Gap Width : 10mm
- Slit Width (detector side) : 1.8mm
- Package : 18.6×15.2×5mm 4. Lead free and Ro HS directive pliant
- "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalprocessing
Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D3-A03901EN Date Oct. 3. 2005 © SHARP Corporation
- Internal Connection Diagram
Top view Voltage regulator
Amp.
2 1 2 3 4 5
(15kΩ)
Anode Cathode VCC VO GND
- Outline Dimensions
(Unit : mm)
Detector center (2.5)
Slit width (Detector side) 1.8±0.1 C1
18.6 10
GP1A57HR
5- 0.4 C0.3 (1.5) (15.2) 8.95
5 1
Date...
