GP1S74PJ000F
Description
GP1S74PJ000F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs.
Key Features
- Transmissive with phototransistor output
- Highlights :
- Special position hooks compatible with 3 different plate thicknesses (1.0, 1.2, 1.6mm)
- Snap insertion
- Key Parameters :
- Gap Width : 5mm
- Slit Width (detector side): 0.5mm
- Package : 17×12.8×8mm (without connector and hooks)
- Connector : Tyco Electronics AMP K.K. (PN : 292133-3)
- Lead free and RoHS directive compliant Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: D3-A04401EN Date Oct. 3. 2005 © SHARP Corporation
