Sharp GP1A73AJ000F
GP1A73AJ000F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remotemount or off-board designs.| Part No. | GP1A73AJ000F |
|---|---|
| Datasheet | GP1A73AJ000F Download |
| Manufacturer |  Sharp |
| Description | Snap-in type Transmissive Photointerrupter |
| Buy | Stock & Price |
DESCRIPTION
● Agency approvals/Compliance 1. Compliant with RoHS directive●
APPLICATIONS
1. General purpose detection of object presence or motion. 2. Example : PPC, FAX, Printer●
FEATURES
1. Transmissive with OPIC output 2. Highlights :● Special position hooks compatible with 3 different plate thicknesses (1.0, 1.2, 1.6mm)
● Hinged snap insertion 3.
KEY PARAMETERS
:● Gap Width : 5mm
● Slit Width (detector side): 0.5mm
● Package : 17×12.8×8mm (without connector and hooks)
● Connector : Tyco Electronics AMP K.K. (PN : 292133-3) or SUMIKO TEC CO., LTD. (PN : GH4A003P000ZA)
● Output Type : High when the object is present with Pullup Resistor. 4. Lead free and RoHS directive compliant * "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalprocessing Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
