Sharp GP2W0104YP
This specification applies to the outline and characteristics of IrDA 1.2 type (data rate 2.4 kbps to 115.2 kbps, low power option compliant).| Part No. | GP2W0104YP |
|---|---|
| Datasheet | GP2W0104YP Download |
| Manufacturer |  Sharp |
| Description | 115 kbps Transceiver |
| Buy | Stock & Price |
FEATURES
● Built-in Photodiode● Operating voltage 2.4 V to 5.5 V
● Conforms to eye safety IEC60825-1, without external resistor
● This product shall not contain the following materials, and these materials shall not be used in the production process for this product. – CFCs – Halon – Carbon Tetrachloride – 1.1.1. Trichloroethane (Methylchloroform) – Specific brominated flame retardants such as the PBBOS and PBBS are not used in this device. 115 kbps Transceiver that this device does not temporarily detect the inconsistent signal, since the transmitted light from the transmitter side reaches the detector side of the same transceiver.
● When designing the system (program), consider that 0.3 ms or more (at TA = 25°C, no input signal) is necessary to return from shut-down mode to readyoperation mode. In addition, thoroughly confirm the operation in the actual application.
● When there is considerable external stray light or a light source is located near the transceiver, or the detector face receives considerable external stray light, a pulse other than signal output may be generated as noise on output terminal of the transceiver.
