Sharp IR3Y30M1
The IR3Y30M/M1 are bipolar single-chip signal processing ICs with built-in low-pass filter and delay line for B/W video cameras. They realize both downsizing and cost reduction of the finished set.| Part No. | IR3Y30M1 |
|---|---|
| Datasheet | IR3Y30M1 Download |
| Manufacturer |  Sharp |
| Description | CCD Signal Processors for B/W CCD Cameras |
| Buy | Stock & Price |
DESCRIPTION
CCD Signal Processors for B/W CCD CamerasFEATURES
● Low power consumption : 265 mW (TYP.)● Wide AGC range : –3 to +29 dB
● High speed sample-and-hold circuits : pulse width 15 ns (MIN.)
● Signal processing from CCD output to 75 $ video output is possible
● Built-in low-pass filter
● Built-in comparator for electronic exposure control
● Built-in aperture circuit and delay line
● Single +5 V power supply
● Packages – IR3Y30M : 48-pin QFP (QFP048-P-1010) – IR3Y30M1 : 48-pin QFP (QFP048-P-0707) 0.5 mm pin-pitch COMPARISON TABLE Package Power consumption PD derating ratio Operating temperature IR3Y30M 48-pin QFP (QFP048-P-1010) 725 mW 5.8 mW/˚C –30 to +75 ˚C IR3Y30M1 48-pin QFP (QFP048-P-0707) 560 mW 4.5 mW/˚C –30 to +70 ˚C In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
