S2S3B00F Datasheet | Sharp Corporation

S2S3 Series ∗Zero cross type is also available. (S2S4 Series) S2S3 Series VDRM : 600V, Non-zero cross type Mini-Flat Package Phototriac Coupler for triggering - Description S2S3 Series Phototriac Coupler include an infrared emitting diode (IRED) optically coupled to an output Phototriac. These devices feature full wave control and are ideal isolated drivers for medium to high current Triacs. SOP package provides 3.75k V isolation from input to output with superior mutative noise immunity. - Features 1. High repetitive peak off-state voltage (VDRM : 600V) 2. Non-zero crossing functionality 3. IFT ranks available (see Model Line-up section in this datasheet) 4. 4pin Mini-flat package 5. Superior noise immunity (d V/dt : MIN. 100V/µs) 6. Double transfer mold construction (Ideal for Flow Soldering) 7. High isolation voltage between input and output (Viso(rms) : 3.75k V) - Agency approvals/pliance 1. Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. S2S3) 2. Approved by CSA, file No. CA95323 (as model No. S2S3) 3. Optionary available VDE Approved (∗)(DIN EN 60747-5-2), file No. 40009162 (as model No. S2S3) 4. Package resin : UL flammability grade (94V-0) (∗) DIN EN60747-5-2 : successor standard of DIN VDE0884. Up to Date code "RD" (December 2003), approval of DIN VDE0884. From Date code "S1" (January 2004), approval of DIN EN60747-5-2. (∗∗) Reinforced insulation type is also available. (PC3SG11YIZ Series) - Applications 1. Triggering for Triacs used to switch on and off devices which require AC Loads. For example heaters, fans, motors, solenoids, and valves. 2. Triggering for Triacs used for implementing phase control in applications such as lighting control and temperature control (HVAC). 3. AC line control in power supply applications. Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may...