Datasheet4U Logo Datasheet4U.com

SGM3123 - White LED Driver

General Description

The SGM3123 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs.

It is optimized for low power keypad and portable backlighting applications.

Key Features

  • Support up to 4 LEDs.
  • Low 40mV Dropout at 20mA.
  • Less than ±5% LED Current Matching.
  • Simple LED Brightness Control.
  • Low Shutdown Current.
  • 2.5V to 5.0V Supply Voltage Range.
  • Thermal Shutdown Protection.
  • Operating Temperature Range: -40℃ to +85℃.
  • Available in Green TQFN-3×3-16L Package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM31323 Constant Current RGB LED Driver SG Micro
SGM31324 RGB LED Driver SG Micro
SGM3134 White LED Driver SG Micro
SGM3200 Charge Pump Boost DC/DC Integrated Load Switch SG Micro
SGM3204 Unregulated 200mA Charge Pump Voltage Inverter SG Micro

Other Datasheets by SG Micro

Part Number Description
SGM3122 Charge Pump White LED Driver
SGM3124 White LED Charge Pump Current Source
SGM3127 White LED Driver
SGM3128 3-Channel LowDropout Low Side White LED Driver
SGM3110 Micro-Power Regulated Charge Pump

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
GENERAL DESCRIPTION The SGM3123 low-dropout bias supply for white LEDs is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. It is optimized for low power keypad and portable backlighting applications. The SGM3123 uses an internal resistor to set the bias current for four LEDs, which are matched to ±5%. The SGM3123's advantages over ballast resistors include much lower bias variation with supply voltage variation, significantly lower dropout voltage, and in some applications, significantly improved efficiency. The SGM3123 requires only a 40mV dropout voltage at a 20mA load on each output to match the LED brightness. The SGM3123 is available in Green TQFN-3×3-16L package. It operates over an ambient temperature range of -40℃ to +85℃.