Datasheet4U Logo Datasheet4U.com

SGM3133 - 4-Channel Charge Pump White LED Driver

General Description

The SGM3133 is a high efficiency and cost effective charge pump white LED driver.

It supports up to 4 white LEDs and regulates a constant current for uniform intensity.

The part maintains the high efficiency by utilizing a 1×/1.5× fractional charge pump and low dropout current sources.

Key Features

  • Input Voltage Range: 2.7V to 5.5V.
  • Drives up to 4 LEDs at 20mA Each.
  • 16-Step Brightness Control.
  • High Efficiency by Fractional Conversion with 1× and 1.5× Modes.
  • Automatic Charge Pump Mode Selection.
  • Switching Frequency: 1MHz.
  • 1% Typical LED Current Matching.
  • Internal Soft-Start Limits Inrush Current.
  • Low Input Noise and Low EMI.
  • Over Current and Over Temperature Protection.
  • Output Over Voltage Protection.
  • Under-Voltage Lockout with Hy.

📥 Download Datasheet

Datasheet Details

Part number SGM3133
Manufacturer SG Micro
File Size 322.36 KB
Description 4-Channel Charge Pump White LED Driver
Datasheet download datasheet SGM3133 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM3133 4-Channel Charge Pump White LED Driver with Low Dropout Current Source GENERAL DESCRIPTION The SGM3133 is a high efficiency and cost effective charge pump white LED driver. It supports up to 4 white LEDs and regulates a constant current for uniform intensity. The part maintains the high efficiency by utilizing a 1×/1.5× fractional charge pump and low dropout current sources. The small equivalent 1× mode open loop resistance and ultra-low dropout voltage of current source extend the operating time of 1× mode and optimize the efficiency of Li-ion battery in white LED applications. User can easily configure each LED current from 1.25mA to 20mA by a pulse dimming control. The dimming of white LEDs current can be achieved by applying a pulse signal to the EN/SET pin.