GENERAL DESCRIPTION
Due to its wide input voltage range, two or three NiCd, NiMH, or alkaline battery cells, as well as one Li-ion cell can also power them. Only three external capacitors are required to build a complete DC/DC charge pump inverter. Assembled in a small package, the complete converter can be built on a 50mm2 board area. Additional board area and component count reduction is achieved by replacing the Schottky diode that is typically needed for start-up into load by integrated circuitry. The fixed switching frequency is 50kHz. FEATURES
Inverts Input Supply Voltage Up to 60mA Output Current Input Voltage Range from 1.4V to 5.5V Quiescent Current: 120μA Integrated Active Schottky Diode for Start-Up into Load -40℃ to +85℃ Operating Temperature Range Available in Green SOT-23-5 Package APPLICATIONS
LCD Bias GaAs Bias for RF Power Amps Sensor Supply in Portable Instruments Bipolar Amplifier Supply The SGM3206 is available in SOT-23-5 package. It operates over an ambient temperature range of -40℃ to +85℃.