Datasheet4U Logo Datasheet4U.com

VM147 - 10Bit Current Sinking VCM Driver

Datasheet Summary

Description

Analog Output : Current Sink Pin Ground Input Pin Power Input Pin I2C Interface Data Line(Serial Data Line) I2C Interface Clock Line(Serial Clock Line) Digital Input: Power saving control (When PS=High ,chip is disabled) ( When PS=Low ,chip is enabled) Absolute Maximum Ratings Unless otherwise note

Features

  • z Programmable sinking output current z I2C serial interface z DAC with 10-BIT resolution z 2.4V.
  • 5.5V power source z Selective Output Slew Rate Control(SRC) z Low voltage control for digital pin PS, SDA, and SCL(i. e. , VIH = 1.68V @ VDD = 2.8V) z Power saving mode leakage current 2.4uA max. z Power saving mode z Automatic power on reset z Ultra small package: WLCSP (0.78.
  • 1.27.
  • 0.35mm) Ordering Information Part Number VM147 WLCSP.
  • XX reserved for a data code Package WLCSP,.

📥 Download Datasheet

Datasheet preview – VM147

Datasheet Details

Part number VM147
Manufacturer SiTI
File Size 262.10 KB
Description 10Bit Current Sinking VCM Driver
Datasheet download datasheet VM147 Datasheet
Additional preview pages of the VM147 datasheet.

📁 Similar Datasheet

  • VM148 - Panel Thermostat module (Velleman)
  • VM1000 - Low Noise Bottom Port Analog Single-Ended Piezoelectric MEMS Microphone (Vesper)
Other Datasheets by SiTI
  • VM149A - 10Bit Current Sinking VCM Driver
  • VM149B - 10Bit Current Sinking VCM Driver
  • VM149C - 10Bit Current Sinking VCM Driver
  • VM149D - 10Bit Current Sinking VCM Driver
  • VM149E - 10Bit Current Sinking VCM Driver
  • VM149F - 10Bit Current Sinking VCM Driver
  • VM114 - Micro-actuator Driver

Full PDF Text Transcription

Click to expand full text
VM147 Version : A.001 Issue Date : 2010/06/08 File Name : SP-VM147-A.001.doc Total Pages : 13 110mA, 10Bit Current Sinking VCM Driver with I2C Interface 9 7 1 SILICON TOUCH TECHNOLOGY INC. 9-7F-1, Prosperity Road I, Science Based Industrial Park, Hsin-Chu, Taiwan 300, R.O.C. Tel：886-3-5645656 Fax：886-3-5645626 VM147 VM147 110mA, 10-Bit Current Sinking VCM Driver with I2C Interface General Specifications The VM147 is a VCM(Voice Coil Motor) driver IC with I2C interface control that is capable of programmable sinking output current. It has a built-in internal voltage reference and operates with a supply voltage range from 2.4V to 5.5V. The DAC is controlled by a signal transmit through a 2-wire I2C serial interface which operates in an I2C fast mode (400 kHz).
Published: |