Datasheet4U Logo Datasheet4U.com

VM149F - 10Bit Current Sinking VCM Driver

Datasheet Summary

Description

Analog Output : Current Sink Pin Ground Pin Power Input Pin I2C Interface Data Line (Serial Data Line) I2C Interface Clock Line (Serial Clock Line) Digital Input: Power Saving Control (When PS=High, chip is disabled) (When PS=Low, chip is enabled) Absolute Maximum Ratings Unless otherwise noted, TA

Features

  • z Programmable sinking output current z I2C serial interface z DAC with 10-bit resolution z 2.3V.
  • 3.6V power source z Selective Output Slew Rate Control (SRC) z Low voltage control for digital pin PS, SDA, and SCL z Power saving mode z Automatic power on reset z Ultra small package: WLCSP (0.805mm.
  • 1.295mm.
  • 0.35mm) Ordering Information Part Number VM149F Package WLCSP, 6Pin Marking TBD 120mA, 10Bit Current Sinking VCM Driver with I2C Interface Version：A.002 、、， Unauthorized.

📥 Download Datasheet

Datasheet preview – VM149F

Datasheet Details

Part number VM149F
Manufacturer SiTI
File Size 253.47 KB
Description 10Bit Current Sinking VCM Driver
Datasheet download datasheet VM149F Datasheet
Additional preview pages of the VM149F datasheet.

📁 Similar Datasheet

  • VM148 - Panel Thermostat module (Velleman)
  • VM1000 - Low Noise Bottom Port Analog Single-Ended Piezoelectric MEMS Microphone (Vesper)
Other Datasheets by SiTI
  • VM149A - 10Bit Current Sinking VCM Driver
  • VM149B - 10Bit Current Sinking VCM Driver
  • VM149C - 10Bit Current Sinking VCM Driver
  • VM149D - 10Bit Current Sinking VCM Driver
  • VM149E - 10Bit Current Sinking VCM Driver
  • VM147 - 10Bit Current Sinking VCM Driver
  • VM114 - Micro-actuator Driver

Full PDF Text Transcription

Click to expand full text
VM149F Version Issue Date File Name Total Page : A.002 : 2013-10-14 : SP-VM149F-A.002.doc : 12 120mA, 10Bit Current Sinking VCM Driver with I2C Interface 9 7 1 SILICON TOUCH TECHNOLOGY INC. 9-7F-1, Prosperity Road I, Science Based Industrial Park, Hsin-Chu, Taiwan 300, R.O.C. Tel：886-3-5645656 Fax：886-3-5645626 VM149F 120mA, 10-Bit Current Sinking VCM Driver with I2C Interface General Specifications The VM149F is a VCM (Voice Coil Motor) driver IC with I2C interface control that is capable of programmable sinking output current. It has a built-in internal voltage reference and operates with a supply voltage range from 2.3V to 3.6V. The DAC is controlled by a signal transmit through a 2-wire I2C serial interface which operates in an I2C fast mode (400 kHz).
Published: |