Datasheet4U Logo Datasheet4U.com

SiT3522 - I2C/SPI Programmable Oscillator

General Description

The SiT3522 is an ultra-low jitter, user programmable oscillator which offers the system designer great flexibility and functionality.

Any-frequency mode where the clock

Key Features

  • Programmable frequencies (factory or via I2C/SPI) from 340.000001 MHz to 725 MHz.
  • Digital frequency pulling (DCO) via I2C/SPI.
  • Output frequency pulling with perfect pull linearity.
  • 13 programmable pull range options to ±3200 ppm.
  • Frequency pull resolution as low as 5 ppt (0.005 ppb).
  • 0.21 ps typical integrated phase jitter (12 kHz to 20 MHz).
  • Integrated LDO for on-chip power supply noise filtering.
  • 0.02 ps/mV PSNR.
  • -40°C to 105°C operating temperatur.

📥 Download Datasheet

Datasheet Details

Part number SiT3522
Manufacturer SiTime
File Size 1.35 MB
Description I2C/SPI Programmable Oscillator
Datasheet download datasheet SiT3522 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SiT3522 340 to 725 MHz Elite Platform I2C/SPI Programmable Oscillator Description The SiT3522 is an ultra-low jitter, user programmable oscillator which offers the system designer great flexibility and functionality. The device supports two in-system programming options after powering up at a default, factory programmed startup frequency: ◼ Any-frequency mode where the clock output can be reprogrammed to any frequency between 340 MHz and 725 MHz in 1 Hz steps ◼ Digitally controlled oscillator (DCO) mode where the clock output can be steered or pulled by up to ±3200 ppm with 5 to 94 ppt (parts per trillion) resolution. A user specifies the device’s default start-up frequency in the ordering code. User programming of the device is achieved via I2C or SPI.