Datasheet4U Logo Datasheet4U.com

SAB-C515C-8RM - 8-Bit CMOS Microcontroller

General Description

Edition 1997-07-01 Published by Siemens AG, Bereich Halbleiter, MarketingKommunikation, Balanstraße 73, 81541 München © Siemens AG 1997.

All Rights Reserved.

Attention please!

Key Features

  • are on next page) Figure 1 C515C Functional Units Enhanced Hooks Technology TM is a trademark of Siemens AG. Semiconductor Group 3 1997-07-01 C515C Features (continued) :.
  • 10-bit A/D converter with multiplexed inputs and built-in self calibration Full duplex serial interface with programmable baudrate generator (USART) SSC synchronous serial interface (SPI compatible).
  • Master and slave capable.
  • Programmable clock polarity / clock-edge to dat.

📥 Download Datasheet

Other Datasheets by Siemens Semiconductor Group (now Infineon)

Part Number Description
SAB-C515C-LM 8-Bit CMOS Microcontroller
SAB-C515-1R24M 8-Bit CMOS Microcontroller
SAB-C515-1RM 8-Bit CMOS Microcontroller
SAB-C515-L24M 8-Bit CMOS Microcontroller
SAB-C515-LM 8-Bit CMOS Microcontroller
SAB-C515A-4R24M 8-Bit CMOS Microcontroller
SAB-C515A-4RM 8-Bit CMOS Microcontroller
SAB-C515A-L24M 8-Bit CMOS Microcontroller
SAB-C515A-LM 8-Bit CMOS Microcontroller
SAB-C517A-4R24M 8-Bit CMOS Microcontroller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Microcomputer Components 8-Bit CMOS Microcontroller C515C Data Sheet 07.97 C515C Data Sheet Revision History : Previous Releases : Page 4 19 52, 53 56, 57 62 1997-07-01 09.96 Subjects (changes since last revision) SSC transfer rate at 10 MHz = 2.5 MHz Figure reference corrected Power saving modes : description of hardware power down mode added Icc specification has been extended tSCLK for Master Mode corrected Edition 1997-07-01 Published by Siemens AG, Bereich Halbleiter, MarketingKommunikation, Balanstraße 73, 81541 München © Siemens AG 1997. All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies.