TLE4269GL Datasheet | Siemens Semiconductor Group

Features q q q q q q q q q q Output voltage tolerance ≤ ± 2 % Very low current consumption Early warning Reset output low doown to VQ = 1 V Overtemperature protection Reverse polarity proof Settable reset threshold Very low drop voltage Wide temperature range Integrated pull up resistor at logic outputs Ordering Code Package Q67000-A9190 Q67006-A9173 P-DIP-8-4 P-DSO-8-1 (SMD) P-DSO-14-4 (SMD) P-DSO-20-6 (SMD) P-DIP-8-4 Type TLE 4269 A TLE 4269 G P-DSO-8-1 w TLE 4269 GM Q67006-A9288 TLE 4269 GL w New type Functional Description Q67006-A9192 This device is a voltage regulator with a fixed 5-V output, e.g. in a P-DSO-8-1 package. The maximum operating voltage is 45 V. The output is able to drive a 150 m A load. It is short circuit protected and the thermal shutdown switches the output off if the junction temperature is in excess of 150 °C. A reset signal is generated for an output voltage of VQ < 4.6 V. The reset threshold voltage can be decreased by external connection of a voltage divider. The reset delay time can be set by an external capacitor. Reset and sense output have integrated pull up resistors. If the integrated resistors are not desired TLE 4279 can be used. It is also possible to supervise the input voltage by using an integrated parator to give a low voltage warning. Semiconductor Group 1 P-DSO-20-6 P-DSO-14-4 1998-11-01 TLE 4269 Pin Configuration (top view) P-DIP-8-4 Ι SΙ RE D P-DSO-8-1 1 2 3 4 8 7 6 5 AEP01668 Ι SΙ RE D 1 2 3 4 8 7 6 5 AEP01813 Q SO R GND Q SO R GND Pin Definitions and Functions (TLE 4269 A and TLE 4269 G) Pin No. 1 2 3 4 5 6 7 8 Symbol I SI RE D GND R SO Q Function Input; block directly to GND on the IC with a ceramic capacitor. Sense Input; if not needed connect to Q. Reset Threshold; if not needed connect to ground. Reset Delay; to select delay time, connect to GND via external capacitor. Ground Reset Output; the open-collector output is internally linked to Q via a 20 kΩ pull-up resistor. Sense Output; the...