TDA6050-5 Datasheet | Siemens Semiconductor Group

Features q Active multistandard video IF with FPLL demodulator q 12-MHz bandwidth q MAC state P-DIP-20 Type TDA 6050-5 Ordering Code Q67000-A5123 Package P-DIP-20 Circuit Description The IF circuit consists of a four-stage capacitively coupled and symmetrically designed controlled amplifier and a real synchronous demodulator with a FPLL-carrier regeneration. Two IF inputs can be selected for applications with different SAWs. The main performance of the device is the very low differential phase DP and gain DG bined with an excellent intermodulation ratio. The positive video output is used to derive the IF and tuner control voltage. The AGC threshold is set by means of a potentiometer. Dependent on the modulation polarity the video signal and the AGC are switched over. MAC state can be selected by an additional signal. Application Multistandard TV/VTR and cable converters with mono or stereo applications. Semiconductor Group TDA 6050-5 Pin Functions Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Function IF input 1a IF input 1b IF switch Tuner AGC output Tuner AGC threshold Main AGC-time constant Mean value AGC-time constant Positive/negative modulation switch N.C. FPLL-VCO (2 × video carrier) FPLL-VCO (2 × video carrier) N.C. FPLL-loop filter FPLL-loop reference Video output MAC-standard switch + VS supply voltage Ground IF input 2a IF input 2b Semiconductor Group TDA 6050-5 Block Diagram Semiconductor Group TDA 6050-5 Absolute Maximum Ratings TA = 0 to 70 ˚C Parameter Supply voltage Junction temperature Storage temperature Thermal resistance (system-air) Operating Range Supply voltage Supply voltage delayed tuner AGC IF-frequency range Ambient temperature during operation Symbol min. Limit Values max. 13.2 150 - 40 125 60 V ˚C ˚C K/W 0 Unit V17 Tj Tstg Rth SA V17 V5 f IF TA 10.8 0.8 12 - 10 13.2 12 80 85 V V MHz ˚C Semiconductor Group TDA 6050-5 DC Characteristics TA = 0 to 85 ˚C; VS = 12 V Parameter Total...