TLE6252G Datasheet | Siemens Semiconductor Group

.. Fault Tolerant Differential CAN Transceiver TLE 6252 G Target Data Features - Data transmission rate up to 125 k Baud - Very low current consumption in stand-by and sleep mode - Optimized EMI behavior due to limited and symmetric dynamic slopes of CANL and CANH signals - Switches to single-wire mode during bus line P-DSO-14-2 failure events - Supports one-wire transmission mode with ground offset voltages up to 1.5 V - Preventation from bus occupation in case of CAN controller failure - Fully-integrated receiver filters - Short-circuit detection to battery and ground in 12 V powered systems - Thermal protection - Bus line error protection against transients in automotive environment Type w TLE 6252 G w New type Ordering Code Q67006-A9337 Package P-DSO-14-2 (SMD) Functional Description The CAN Transceiver works as the interface between the CAN protocol controller and the physical differential CAN bus. Figure 1 shows the principle configuration of a CAN network. The TLE 6252 is optimized for low-speed data transmission (up to 125 k Baud) in automotive and industrial applications. In normal operation mode a differential signal is transmitted/received. When bus wiring failures are detected the device automatically switches in single-wire mode to maintain munication. While no data is transferred, the power consumption can be minimized by multiple low power modes. Semiconductor Group 1998-11-01 TLE 6252 G Local Area 1 Local Area 2 Controller 1 Controller 2 Rx D 1 Tx D 1 Rx D 2 Tx D 2 Transceiver...